Rosewill RC216 User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 13
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
6
User Manual
SATA II / ATA 133 PCIe Card RC216
5. Please use arrow keys and to switch the disk, use the “space” key to mark the selected
disk, then press Enter.
6. Input the RAID size, press Enter.
7. When asked Created RAID on the select HDD (Y/N)?, press Y to accept.
8. At the next screen select Save And Exit Setup, press Enter.
When asked Save to disk &Exit (Y/N)?, press Y to exit the BIOS.
RAID 0+1 (Striping + Mirroring)
1. As the BIOS boots press Ctrl+J when prompted to enter the RAID BIOS.
2. At the next screen select Create RAID Disk Drive, press Enter.
3. Enter RAID name, press Enter.
4. Please use arrow keys and to switch the RAID level to 01-Stripe+Mirror, then press Enter.
5. Please use arrow keys and to select chunk size from 4K, 8K, 16K, 32K, 64K or 128K, then
press Enter.
6. Input the RAID size, press Enter.
7. When asked Created RAID on the select HDD (Y/N)?, press Y to accept.
8. At the next screen select Save And Exit Setup, press Enter.
When asked Save to disk &Exit (Y/N)?, press Y to exit the BIOS.
Delete RAID Disk Drive
1. As the BIOS boots press Ctrl+J when prompted to enter the RAID BIOS.
2. At the next screen select Create RAID Disk Drive, press Enter.
3. Please use arrow keys and to select the array you want to delete.
4. When asked ALL DATA ON THE RAID WILL LOST!! ARE YOU SURE TO DELETE (Y/N),
press Y to accept.
Solve Mirror Conflict
When a RAID set is created, then metadata written to the disk includes drive connection
information. If, after a disk failure, the replacement disk was previously part of a RAID set (or used
in another system), it may have conflicting metadata. If so, this will prohibit the RAID set from
being either created or rebuilt, in order for the RAID set to function properly, this old metadata
must be first overwritten with the new metadata. To resolve this, from the main BIOS window
select Solve Mirror Conflict, then press Enter, the correct metadata, including the correct drive
connection information, will be written to the replacement disk.
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments