Rosewill RNX-N2X User Manual download pdf (Page 49)

Wireless Adapter RNX-N2X User Manual

way for the SOHO to set up a wireless network.

• Profile: Enter a name for the profile; this does not need to be the same as the SSID.

• SSID: Enter the SSID of the network or select one from the drop-down list. The SSID is

a unique name shared among all points in your wireless network. The SSID must be

identical for all points in the network, and is case-sensitive.

• Network Type: Select Ad-hoc from the drop-down list.

• TX Power: Select a transmit power from the drop-down list. If your notebook is

connected to external power then select 100% or auto, if not, select one of the lower

values for power saving.

• Preamble: Select Auto from the drop-down list, unless you are aware of the preamble

type (long or short) used in each station.

• Ad-hoc wireless mode: Select a wireless mode from the drop-down list depending on

the type of stations used in the ad-hoc network. Select B/G Mix if the network consists

of 11b and 11g stations. Select B-only or G-only if the network consists of only one

type of wireless mode.

• RTS Threshold: Place a check in this box if you would like to enable RTS Threshold.

Any packet in the RTS/CTS handshake larger than the specified value (bytes) will be

discarded.

• Fragment Threshold: Place a check in this box if you would like to enable Fragment

Threshold. Any packet larger than the specified value (bytes) will be discarded.

• Click on the Apply button to save the changes.

4.3 AUTHENTICATION AND SECURITY

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 70 71

No comments

Rosewill RNX-N2X User Manual Page 49