Rosewill RGS-1024 User Manual download pdf (Page 10)

24-Port Gigabit Ethernet Switch RGS-1024 User Manual

-9-

Chapter 2. Installation

2.1 Mounting the Switch on a Desk

Before place the Switch on a desk, attach four rubber footpads to

the flutes on the Switch bottom, then lay the Switch on the

desktop, where can be have as much as 5kg placed on top.

Note:

1. The electrical outlet shall be installed near the device and

shall be easily accessible.

2. Make sure there is free space for radiating heat and air.

3. Make sure not to place anything too heavy on top of the switch.

2.2 Mounting the Switch in a Rack

The dimension of RGS-1024 is designed according to the

standard 19 rack-mountable steel case of Electronic Industries

Association.

Turn off all the equipment connected to the Switch before

mounting it in the rack, then rivet the two "L" brackets onto each

side of the Switch, fasten it with screws in the rack.

Figure 2-1 Rivet the “L” brackets onto the Switch

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Rosewill RGS-1024 User Manual Page 10