Rosewill RPLC-500 User Manual download pdf (Page 26)

200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-201KIT- User’s Manual

-26-

3.2 Joining a Network

Scenario:

Devices A and B are located in network N. Users want to add device C (the

joiner) into network N. Any devices on network N can become the „adder‟.

Joining a network

Please follow below to add Device C to Network N using the Security button:

1. Press the Security/Reset pushbutton on device C (the joiner) for 5-8

seconds. The device will reset and restart with a random NMK.

2. Press the Security/Reset button on device C (the „joiner‟) for less than 3

seconds.

3. Within 30 seconds, press the Security/Reset button on device A (or device

B) for less than 3 seconds.

4. Wait for connection to complete.

The power indicator on both devices will flash evenly at 1 second intervals until

the operation succeeds or fails. If the connection succeeds, the Power and Data

indicators on both devices illuminate steadily. If the connection fails, the Power

indicators on both devices keep steady on, but the Data indicators on both

devices are off. In that case, repeat steps 1-4.

3.2 Leaving a Network

Scenario:

Device C is located in a network. Users want to remove device C (the „leaver‟)

from its network.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

No comments

Rosewill RPLC-500 User Manual Page 26